 |
INFX - SURFACE MOUNT DISPLAYS  |
INFX
Remote display can be mounted in 1/8 DIN panel cutout or on surface mount bail
|
REQUIRES ADOBE ACROBAT -  |
 |
 |
 |
COMMON SPECIFICATIONS
Accuracy: ±0.005% rdg
Span Temperature Coefficient: ±20 ppm
Step Response: 1 sec to 99.9%
Warmup to Rated Accuracy: 50 min
Operating Ambient: 0 to 50°C, 95%RH, non-condensing
Storage Ambient: -40 to 85°C
Power: 230 Vac, 49-400 Hz; 10 to 32 Vdc
Power Consumption: 6 W nominal, 10 W max
Normal Mode Rejection: 60 dB
Common Mode Rejection: 120 dB
Common Mode Voltage: 1500 V peak per HV test
Resolution: 15-bit
Conversion: dual-slope technique
Reading Rate: 3/sec or 13/sec, 60 Hz; 3/sec or 12/sec, 50 Hz
Display: red or green 6-digit, 14-segment, 13.7 mm (0.54"); 4 alarm indicators
Dimensions: 48 H x 96 W x 165 mm D (1.9" x 3.8" x 6.5")
Panel Cutout: 45 H x 92 mm W (1.8" x 3.6"); 1/8 DIN
Weight: 574 g (1.27 lb)
TTL Outputs: four, isolated open collector; rated 150 mA at 1 V sink, 30 V open
BCD Output: isolated, tri-state, TTL/CMOS compatible; external 5 V supply for isolated; internal 5 V supply for non-isolated
Dual Relays: form C, 7 A at 30 Vdc or 230 Vac
Four Relay Option: dual 7 A relays and dual 1 A relays
Analog Output
0-5 V/1-5 V/0-10 V/ 0-20 mA/4-20 mA, user selectable; 354 Vp isolation; 14-bit resolution; 0.1% accuracy, 50 msec step response
RS-232 Communications
300/600/1200/2400/4800/9600/19.2k baud; RJ11 4-wire connection; complete program setup and message display capability; programmable to transmit current display, alarm status, min/max, actual measured input value and status
RS-485 Communications
300/600/1200/2400/4800/9600/19.2k baud; RJ12 6-wire connection; addressable from 0 to 199
PROCESS INPUTS—INFXU, INFXP, INFXS, INFXW
Voltage Input Ranges: 0-100 mV, 0-1 V, 0-5 V, 1-5 V, 0-10 V, 0-100 V, ±50 mV, ±500 mV, ±5 V, ±50 V
Current Input Ranges: 0-20 mA, 4-20 mA
Input Configuration: single-ended
Polarity: Unipolar/bipolar, programmable
Span Adjustment: 0.00001 to 500,000; programmable
Offset Adjustment: 0 to 999,999 or 0 to -99,999; programmable
TEMPERATURE INPUTS—INFXU, INFXT
Thermocouple Input Types: J, K, T, E, R, S, B, N, J DIN
RTD Input: any 6 to 6k ohm NIST or DIN platinum and any linear RTD
RTD Connection: 2, 3 or 4 wire
Sensor Break Protection: upscale or downscale, programmable
Overvoltage Protection: 25 V peak
SENSOR EXCITATION—INFXP, INFXS, INFXU, INFXW
Sensor Excitation, INFXS, INFXU, INFXW: 10 V to 30 mA; 24 V to 25 mA Sensor Excitation,
INFXP: 24 V to 25 mA
| Models - INFXU, INFXP, INFXS, INFXW, INFZU, INFZP, INFZS, INFZW | Models - INFXU, INFXT, INFZU, INFZT | ||
|---|---|---|---|
Range Code |
Range |
Range Code |
Range |
DC1 |
0-100 mV |
J (*) |
J Iron-Constantan |
DC2 |
0-1 V |
K (*) |
K CHROMEGA -ALOMEGA |
DC3 |
0-5 V |
E (*) |
E CHROMEGA -Constantan |
DC4 |
1-5 V |
T (*) |
T Copper-Constantan |
DC5 |
0-10 V |
B (*) |
B Pt30%Rh-Pt6%Rh |
DC6 |
0-100 V |
R (*) |
R Pt13%Rh-Pt |
DC7 |
±50 mV |
S (*) |
S Pt10%Rh-Pt |
DC8 |
±500 mV |
N (*) |
N Nicrosil-Nisil |
DC9 |
±5 V |
J DIN (*) |
J DIN Iron-Constantan |
DC10 |
±50 V |
RTD1 (*) |
RTD 10 ohm Copper |
C1 |
0-20 mA |
RTD2 (*) |
RTD 100 ohm Pt 0.00385 |
C2 |
4-20 mA |
RTD (*) |
RTD 100 ohm Pt 0.00392 |
* Specify C (Celsius), F (Fahrenheit) or K (Kelvin)
 |
 |
Copyright 2003,
NEWPORT Electronics, Inc. All rights reserved.