After clicking on DEMO the following Home page will appear--

Click on Read Sensor, after 20 seconds or so, you will see the default page, briefly--

and then the actual readings of Temperature, Humidity and Dewpoint--

Note: if a blank screen appears without any "java application running" or "image of Java logo",
please verify you have the latest Java Runtime Enviroment installed and setup according to instructions.

The Access Control Page is disabled for this demo.

Click on Chart. In order to access this page a password is required;
please contact our Application Engineers info@newportUS.com or 1-714-540-4914.

Click on Configuration, this is where you may change the Device Setup.
Click on No 1, 2 or 3 and you will be able to modify the Sensor Parameters.

In the Sensor Parameter page, you can change the various fields with any ASCII text.
Note: if you do change a field you must eliminate any blank spaces at the start of that field.

Reading Commands:
SRT = Read the Temperature in degree C.
SRTF = Read the Temperature in degree F.
SRH = Read the Humidity.
SRD = Read the Dewpoint in degree C.
SRDF = Read the Dewpoint in degree F.